![]() Equipping You to Communicate Effectively | support CMN & share a library of 19K+ images, videos, etc Go Pro! |
![]() | ![]() |
| |||||||
| Technical Miscellaneous Can't find a place for your technical question or tip? Post it here! |
![]() |
| | Thread Tools | Search this Thread | Rate Thread | Display Modes |
| |||
| Needing to setup 3 displays Wanting to setup 3 displays from a computer running MediaShout 4 - 1 display to monitor, 1 to projector, and 1 to confidence monitor. I'm having a hard time getting this to work. I have 2 video cards installed, both supporting 2 displays, but the computer only recognizes 1 card. 1 is PCI-E, and the other is PCI. Any ideas on what may be wrong? I spent quite a while being frustrated over this yesterday ![]() |
| ||||
| Are you wanting to send the same signal to the three screens? If so you need one output of the program and then use a VGA splitter (active) to provide the three feeds. The second output is the control screen that needs to come out of the other output on the video card. I don't know if you can send the same signal out of mulltiple video card outputs. That's not normally how it's done with MediaShout.
__________________ Bob |
| |||
| Quote:
|
| |||
| Quote:
Are you using this with MediaShout 4? If so, how's it working out? |