Equipping You to Communicate Effectively
library of 19K+ images, videos, etc
Go Pro!
Equipping You to Communicate Effectively | support CMN & share a library of 19K+ images, videos, etc Go Pro! |
 |  |
| |||||||
| General Video Production Editing systems and software, cameras, mixers and more! |
 |
| | Thread Tools | Search this Thread | Rate Thread | Display Modes |
Monday, December 7th, 2009, 01:16 PM
| |||
| |||
| Videonics MX-1 level shift Our church was donated a Videonics MX-1. It seems to work ok accept for a slight video level shift during transitions. It seems to occur on the outgoing source during fade/dissolve, and on incoming source on cuts. Anyone experienced this problem and have a solution? Thanks.   |
|
Monday, December 7th, 2009, 02:03 PM
| ||||
| ||||
| You may want to look at http://www.churchmedia.net/forums/general-video-production/17389-videonics-mx-1-repair.html Note post #10, indicating they sent the unit to Focus Enhancements for a flat bench fee. But you may want to look at some thing current. The MX-1 is an EOL product. Go to videonics. dot com for the Focus Enhancements website. Good luck with it! |
Linear Mode
