Stretched S-video output

[Mustangnaz]

I am running two GeForce FX5200 video cards. #1 only has our primary monitor attached to it. #2 has the VGA going out to a switcher/scaler, and the S-video out to our video mixer (Edirol V4). I set the two #2 outputs to be the same. Everything works except the S-video out to the mixer is only showing the top half of the image and is stretched to fill the screen. Any ideas on how to fix this?

[cjsebes]

The S-video is standard definition so should only have a resolution of 640x480 or maybe 720x480 depending on the card. Try to set the two #2 outputs to be 640x480 (or thereabouts) and see if that gives you any better results.

Peace.
Chris