Chauvet Stage Designer 50 problems
As some of you know I have ordered a ton of lights for our church over the past month, and have had some problems here and there. Well I have another problem with the Chauvet Stage Designer 50. We are trying to connect one Intimidator 1.0 to the Chauvet Stage Designer 50 through DMX. The manual that came with the controller was not user friendly at all. When we connect the Scanner to the controller we were only able to control the Light coming on and the paning and tilting from the buttons below the faders, nothing else. It seemed that the faders did nothing at all to interact with the scanner. We could not change the gobos nor the color, and the when we pressed the buttons the panning and tilting would only go one way. I know the faders are working because when you move them they show which value they are in the LED screen. I have the scanner set to DMX Channel 1 and connected through a DMX cable to the controller. On the back of the controller there is a Polarity Selector which does not mean anything to me at all. We have tried switching it both ways and get different functions from the scanner. I just dont know If i have something set wrong on the controller.